How to Remove the Door Hinges From a Whirlpool Dishwasher
- 1). Turn off the power to your dishwasher in your kitchen's circuit breaker.
- 2). Remove the two screws on the door panel using a screwdriver, then remove the two screws from the lower toe panel.
- 3). Lift up the door so that it detaches from the hinges and then remove the door completely from the dishwasher.
- 4). Locate the hinges on both sides of the front of the dishwasher. Remove the screws holding the door hinges in place.
- 5). Remove the door hinges from the dishwasher, then inspect the hinges for damage to see if they need to be replaced.
- 6). Place the old door hinges or the new replacement hinges back onto the unit, making sure the springs are still secured within each hinge.
- 7). Reinsert the screws back into the door hinges. Slides the dishwasher door onto the hinges so it becomes connected.
- 8). Reinsert the screws into the door panel and toe panel so that the door is fully reconnected. Turn the power back on in the circuit breaker.
