How to Replace a Rearview Mirror on a Corolla
- 1). Disconnect the wire harness from the base of the mirror. The harness has a small tab in its center. Pry the tab up and pull the connecting ends apart. If you have a base Corolla that does not have a built-in compass, skip this step.
- 2). Remove the T8 Torx screw that secures the stem of the mirror to the window button glued to the windshield.
- 3). Slide the stem of the mirror up to remove it from the window button.
- 4). Slide the replacement mirror onto the button and secure it into place with the T8 Torx screw.
- 5). Reconnect the wire harness and press the small tab back down to prevent the two pieces from separating.
