Unable To Use A Browser To Connect To A Voip Phone
linksys spa2102
linksys spa2102 usd47
Unable to Use a Browser to Connect to a VoIP Phone
ome ATA VOIP adapters allow configuration through an integrated web interface. This configuration is stored within a chip on the adapter and allows setup through a graphical user interface. You need to know the Internet protocol address of the VOIP adapter and input this information into the address line of your browser. Since the ATA serves as both a VOIP and router, the computer is already making a successful connection to the device making the most obvious reason security related. Since many interactive interfaces require the use of ActiveX scripts, you will need to add the device's address to your safe lists. Additionally, in an effort to rule out multiple potential problems at once, you can boot the computer in Windows Safe Mode with networking capability.
Unplug the power from the ATA VOIP adapter.
2
Connect an Ethernet cord from your broadband modem to the "Internet" port on the back of the ATA VOIP adapter.
Connect an Ethernet cord from the "LAN" or "Ethernet" port on the back of the ATA VOIP adapter to the Ethernet port on your computer.
4
Plug the power cord for the ATA VOIP adapter into the wall outlet.
Turn on the computer.
6
Press and hold the "F8" keyboard key as your computer starts. Release your "F8" key when you see the "Advanced Boot Options."
7
Select "Windows Safe Mode with Networking" by using your "Arrow" and "Enter" keys. This boots Windows without any third-party security programs while maintaining basic networking functionality.
Identify IP address
Press the "Windows" and "R" keys simultaneously. This opens a "Run" box on the bottom of your screen.
9
Type "CMD" in the "Run" box and click the "OK" button. This opens a Command Prompt.
10
Type "IPconfig /all" and press the "Enter" key. This displays a list of your current IP configuration.
11
Write down the numerical address next to "Default Gateway." This number is the Internet protocol address you need to connect with your device.
Add Address to Safe Sites List and Connect
12
Open Internet Explorer.
13
Click "Tools" and click "Internet Options." This opens an "Internet Options" dialog window on your screen.
14
Click the "Security" tab and then click the "Trusted sites" icon.
15
Click the "Sites" button. This opens a "Trusted Sites" dialog window.
16
Click to remove the checkmark in the box next to "Require server verification (https) for all sites in this zone."
17
Type the Internet protocol address in the "Add this Website to the zone" field box and then click the "Add" button. Click the "Close" button to close the "Trusted Sites" dialog window.
18
Type the address into the address bar and press the "Enter" key. Follow the instructions onscreen or in your user manual to configure your device.
item: linksys spa2102 http://www.buybuyseller.com/linksys-spa2102-voip-router-ata-spa2102-p-14908.html
linksys spa2102 usd47
Unable to Use a Browser to Connect to a VoIP Phone
ome ATA VOIP adapters allow configuration through an integrated web interface. This configuration is stored within a chip on the adapter and allows setup through a graphical user interface. You need to know the Internet protocol address of the VOIP adapter and input this information into the address line of your browser. Since the ATA serves as both a VOIP and router, the computer is already making a successful connection to the device making the most obvious reason security related. Since many interactive interfaces require the use of ActiveX scripts, you will need to add the device's address to your safe lists. Additionally, in an effort to rule out multiple potential problems at once, you can boot the computer in Windows Safe Mode with networking capability.
Unplug the power from the ATA VOIP adapter.
2
Connect an Ethernet cord from your broadband modem to the "Internet" port on the back of the ATA VOIP adapter.
Connect an Ethernet cord from the "LAN" or "Ethernet" port on the back of the ATA VOIP adapter to the Ethernet port on your computer.
4
Plug the power cord for the ATA VOIP adapter into the wall outlet.
Turn on the computer.
6
Press and hold the "F8" keyboard key as your computer starts. Release your "F8" key when you see the "Advanced Boot Options."
7
Select "Windows Safe Mode with Networking" by using your "Arrow" and "Enter" keys. This boots Windows without any third-party security programs while maintaining basic networking functionality.
Identify IP address
Press the "Windows" and "R" keys simultaneously. This opens a "Run" box on the bottom of your screen.
9
Type "CMD" in the "Run" box and click the "OK" button. This opens a Command Prompt.
10
Type "IPconfig /all" and press the "Enter" key. This displays a list of your current IP configuration.
11
Write down the numerical address next to "Default Gateway." This number is the Internet protocol address you need to connect with your device.
Add Address to Safe Sites List and Connect
12
Open Internet Explorer.
13
Click "Tools" and click "Internet Options." This opens an "Internet Options" dialog window on your screen.
14
Click the "Security" tab and then click the "Trusted sites" icon.
15
Click the "Sites" button. This opens a "Trusted Sites" dialog window.
16
Click to remove the checkmark in the box next to "Require server verification (https) for all sites in this zone."
17
Type the Internet protocol address in the "Add this Website to the zone" field box and then click the "Add" button. Click the "Close" button to close the "Trusted Sites" dialog window.
18
Type the address into the address bar and press the "Enter" key. Follow the instructions onscreen or in your user manual to configure your device.
item: linksys spa2102 http://www.buybuyseller.com/linksys-spa2102-voip-router-ata-spa2102-p-14908.html
