Simple tips for buying Sterling silver jewelry part 1
I limit its segments instead of silver jewelry just for show room or silver to household appliances. Whatever you have in the note? "There was a stamp of origin there is a good code of 9:25 means ..." It's that simple? Many do not know 18k gold content in Surabaya and Jakarta were different. everyone knows that people buy silver jewelry never fuss levels. But if we have cap 925 shiny white look, already. Done. matter after it used a few days there was rapid corrosion and new blackened in the know then.
What causes it? Many paktor could be:
1. Levels are far below the free fall 92.5% although there is stamped 925. The goal is what else if not for the sake of the larger profitable. Why does this incident? The story is similar play against batik batik prints made in china factory. No exception to the jewelry industry, especially silver. Competition-off handmade artisan-made concrete with the increasingly fierce because there are very good economic giant makes its goods so cheap. The name of the giant that is China. This inevitably affects most players casting silver jewelry in Indonesia. Its modest cost in order to reduce the silver content in the lower becomes so low (some 50% to 80%) and the cap 925. Know from where? My silver jewelry wholesale business since the world cup korea japan. 90% of my handmade silver jewelry, teak is sold in the State. Although sometimes pemesannya from outside Java, ketemuannya identity must remain in the State, his name is not always linear slalu effort in the conditions faced down and up. There's a nice situation there are also annoying condition. So had the rest of the goods sold to markets around the muddy up to the mall. At the time of payment there is also a buy my jewelry by barter. He took my jewelry and paid for with silver jewelry that has been broken, damaged or dilapidated. That's where I know that it levels its silver jewelry is not the same. So many of my jewelry after I melt it in black once there are also pretty good but not much. Most levels of silver jewelry ancur-ancur manufacturer's artificial because the cast system is not difficult to make jewelry with a silver content as low as they want. While not able to make handmade jewelry with silver content is too low. When I was working on other people so annoyed if given a raw material with the ugly silver kedalanya levels so low in the soldering and the formation of the material, because the material will easily melt / melt, hard and breaks during the manufacturing process. Others with the product's cast (casting), does not go through the process of forging, bending, lilt, cut or pull the print live like martabak Bangka delicious. So it would make 20% silver jewelry is also not a problem. about the display easy to stay cap 925 or the layered rhodium love again with nickel and pure silver (remember that different from the old layer) be inexpensive silver with a charming appearance. That's how I know by experience and prudence demanded me to sort out where the fine silver content of the condition was good and where the levels of bad peerak artificial bali or jogaja if I dare. Besides they still made a lot of hand-made with no slob castingpun levels are still good at least do not need to be purified again we stayed longer interfere with the pure silver so that its levels rise. But the twisted hunk of silver bali kejakarta not always available. 3 months was not necessarily his goods there. Even if there is not necessarily miss out.
2. Solder Handmade stained menggnakan system to connect the harvesters. The sections stained ideally connection to 1:2 with the composition of 1 gram and 2 grams of pure silver brass. But many also wear the composition of 1: 5 or 1:7 of connections patrinya this will then look good or not. If the levels of bad patrinya If used in a long time the connections will be seen floating colors. This is one of the weaknesses handmade. Usually craftsmen will mess around with soldered to get a sideline. Although the manufacturer (casting) can be more wicked Want to make jewelry with levels as low as any he could. Handmade could not. He played it on stained.
3. Paktor of the wearer. Levels are good but too much of the wearer's sweat contains salt so as to accelerate the rate of corrosion. It could also be from the way we store (see also tips on the blog neighboring jewelry store). Actually there are many factors causing the silver to black, but feared his blog that stands alone yet. sterling silver jewelry
Now the tips:
1. If the only purpose for the trendy and no desire jewelry store silver in the long term pertimbangn buy cheap jewelry that so it does not matter how many levels does not really matter. Origin looks good model, let alone buy cheap trading system. It is finished. an important force.
2. If the purpose for collection / in use for a long time make sure the measure was really 9:25. at least close. although our jewelry will be mdah dirty on clean again. Living in the lap pake in detergent dissolved in hot water so well. If levels are low so that looks shiny longer have to use a number of chemicals and equipment are not cheap too.sterling silver jewely
3. If the goal for sale If the levels are good although not 925 at least 90%. With so easy to wash and jewelry will also be easily recycled. Seapes-rongsokpun apesnya if the sale has a price. Specifically with the purchase of silver trading system should not be too obsessed with cheap silver jewelry. Think also awetnya. Easily damaged or not, if the levels are good or bad is not induced him to us as well so troublesome in the treatment. Note also his diamond stone for the usual diamond stone on the market of his class from A-1 through A-4. The usual fall in the jewelry would not be difficult to distinguish these diamond stones cheap or expensive. Reflected light can be distinguished, apart from that difference is that a cheap diamond stones are so good back in the wash will experience color fading. Sometimes difficult to differentiate where the diamonds jewelry silver stone where rice. So it's up to you if the aim cheap silver jewelry-pergram 7000 I was able to make it. If the goal of quality. It seems to be calculated again ... ... ..!
What causes it? Many paktor could be:
1. Levels are far below the free fall 92.5% although there is stamped 925. The goal is what else if not for the sake of the larger profitable. Why does this incident? The story is similar play against batik batik prints made in china factory. No exception to the jewelry industry, especially silver. Competition-off handmade artisan-made concrete with the increasingly fierce because there are very good economic giant makes its goods so cheap. The name of the giant that is China. This inevitably affects most players casting silver jewelry in Indonesia. Its modest cost in order to reduce the silver content in the lower becomes so low (some 50% to 80%) and the cap 925. Know from where? My silver jewelry wholesale business since the world cup korea japan. 90% of my handmade silver jewelry, teak is sold in the State. Although sometimes pemesannya from outside Java, ketemuannya identity must remain in the State, his name is not always linear slalu effort in the conditions faced down and up. There's a nice situation there are also annoying condition. So had the rest of the goods sold to markets around the muddy up to the mall. At the time of payment there is also a buy my jewelry by barter. He took my jewelry and paid for with silver jewelry that has been broken, damaged or dilapidated. That's where I know that it levels its silver jewelry is not the same. So many of my jewelry after I melt it in black once there are also pretty good but not much. Most levels of silver jewelry ancur-ancur manufacturer's artificial because the cast system is not difficult to make jewelry with a silver content as low as they want. While not able to make handmade jewelry with silver content is too low. When I was working on other people so annoyed if given a raw material with the ugly silver kedalanya levels so low in the soldering and the formation of the material, because the material will easily melt / melt, hard and breaks during the manufacturing process. Others with the product's cast (casting), does not go through the process of forging, bending, lilt, cut or pull the print live like martabak Bangka delicious. So it would make 20% silver jewelry is also not a problem. about the display easy to stay cap 925 or the layered rhodium love again with nickel and pure silver (remember that different from the old layer) be inexpensive silver with a charming appearance. That's how I know by experience and prudence demanded me to sort out where the fine silver content of the condition was good and where the levels of bad peerak artificial bali or jogaja if I dare. Besides they still made a lot of hand-made with no slob castingpun levels are still good at least do not need to be purified again we stayed longer interfere with the pure silver so that its levels rise. But the twisted hunk of silver bali kejakarta not always available. 3 months was not necessarily his goods there. Even if there is not necessarily miss out.
2. Solder Handmade stained menggnakan system to connect the harvesters. The sections stained ideally connection to 1:2 with the composition of 1 gram and 2 grams of pure silver brass. But many also wear the composition of 1: 5 or 1:7 of connections patrinya this will then look good or not. If the levels of bad patrinya If used in a long time the connections will be seen floating colors. This is one of the weaknesses handmade. Usually craftsmen will mess around with soldered to get a sideline. Although the manufacturer (casting) can be more wicked Want to make jewelry with levels as low as any he could. Handmade could not. He played it on stained.
3. Paktor of the wearer. Levels are good but too much of the wearer's sweat contains salt so as to accelerate the rate of corrosion. It could also be from the way we store (see also tips on the blog neighboring jewelry store). Actually there are many factors causing the silver to black, but feared his blog that stands alone yet. sterling silver jewelry
Now the tips:
1. If the only purpose for the trendy and no desire jewelry store silver in the long term pertimbangn buy cheap jewelry that so it does not matter how many levels does not really matter. Origin looks good model, let alone buy cheap trading system. It is finished. an important force.
2. If the purpose for collection / in use for a long time make sure the measure was really 9:25. at least close. although our jewelry will be mdah dirty on clean again. Living in the lap pake in detergent dissolved in hot water so well. If levels are low so that looks shiny longer have to use a number of chemicals and equipment are not cheap too.sterling silver jewely
3. If the goal for sale If the levels are good although not 925 at least 90%. With so easy to wash and jewelry will also be easily recycled. Seapes-rongsokpun apesnya if the sale has a price. Specifically with the purchase of silver trading system should not be too obsessed with cheap silver jewelry. Think also awetnya. Easily damaged or not, if the levels are good or bad is not induced him to us as well so troublesome in the treatment. Note also his diamond stone for the usual diamond stone on the market of his class from A-1 through A-4. The usual fall in the jewelry would not be difficult to distinguish these diamond stones cheap or expensive. Reflected light can be distinguished, apart from that difference is that a cheap diamond stones are so good back in the wash will experience color fading. Sometimes difficult to differentiate where the diamonds jewelry silver stone where rice. So it's up to you if the aim cheap silver jewelry-pergram 7000 I was able to make it. If the goal of quality. It seems to be calculated again ... ... ..!
