How to Troubleshoot a Speed Queen
- 1). Check to see that your washing machine's control knobs are set properly.
- 2). Ensure both the cold and hot water outlets are turned on and properly connected to the rear of the washing machine.
- 3). Make sure the lid or door of your washing machine is properly closed.
- 1). Ensure that the power cord is fully plugged into the electrical outlet.
- 2). Ensure that the cycle selector knob is not set to the "off" position.
- 3). Press and hold in the "start" button for at least two seconds to properly start the wash cycle.
- 4). Check the fuse or circuit breaker that provides power to your machine for possible problems.
- 1). Verify the motor overload protector hasn't been activated by waiting five minutes before trying to start your washer's spin cycle again.
- 2). Ensure the lid is securely closed prior to the start of the clothes spin cycle.
- 3). Sort clothes in the washing machine so that the weight of the clothes is evenly distributed.
- 1). Ensure that the drain hose running from the washing machine isn't kinked or clogged.
- 2). Ensure the drain receptacle is not clogged.
- 3). Refer to the installation instructions to ensure that your machine has been set up properly.