Arthritis is a very common ailment that adversely affects many individuals.
Primarily those over sixty are more likely to suffer from reduced mobility as a result of diseases like arthritis, but it can affect people of all ages.
A person that suffers from arthritis often finds that many everyday tasks become more difficult, including the task of moving their body to a standing position.
This increases the risk of a fall, which often results in injury, so many people invest in lift chairs.
Lift chairs are mobility standing aids that are used to help a person stand in an easier and safer manner than they could otherwise do on their own.
The chair can be operated by the seated individual by the use of an attached hand control.
The hand control is simple to use and is attached directly to the chair, so there is no need to worry about losing it or remembering to replace the batteries.
Contained in the base of the chair is a strong lifting mechanism, which, when activated by the hand control, causes the chair to rise slowly into the air.
After the chair has been fully raised position, the seated individual is able to exit the chair in a safe manner.
The seat of the chair is at a slight angle and so leaving the chair can be done safely.
Lift chairs are also be used in order to make sitting safer.
They also function similarly to a regular recliner, with a reclining backrest and footrest.
However, the footrest and backrest are controlled electronically, so it is much easier to find a position that is comfortable and ergonomic.
Since the chair will rise into the air, it is essential to know the height of the individual who will be using the chair.
The chair will have a height rating, which is usually a minimum and maximum height.
It is very important that the user of the chair falls into this category.
If you get one that is designed for taller individuals, the chair might rise too high.
If you get one that is designed for shorter individuals, you might end up with a chair that does not raise high enough.
In either of these cases, the safety of the person using the chair will be negatively effected.
The height rating of the chair is one of several measurements the dealer will provide.
The seats width, depth, back height, and several other measurements will be provided.
Most people today purchase lift chairs online, because it is less expensive and you will get a better selection.
This means you will not be able to sit in the chair before you purchase it, so understanding the measurements is important.
Using a tape measure or measuring stick, go ahead and measure an existing chair.
You should then use these measurements to compare them with the published measurements of the lift chair.
If you follow the height rating, then the measurements that are most directly related to the comfort of the user are the seats width and the seats depth.
The distance that the chair must be placed from the wall in order to fully recline should also be noted, because this will give you an idea of how much space you need in your living room.
It is possible to reduce falling risks by the use of a lift chair, but it is important to find a chair that is designed to fit your body dimensions.