Kitchen Remodeling - Uninstalling Kitchen Cabinets
Show romanization
1. Once the banks have been removed and its fittings, the next step will be to dismantle the counter tops, and remove the cabinets. For this you will need a hammer, pry bar, putty knife, screwdriver, crowbar, and I saw him. Is conducting several counter tops, plywood, and nailed to the base cabinets, with the completion of the development of materials on top. With the exception of plastic laminated counter top, the only part worth saving is the substance the end - in the tiles and marble or wood. It can be difficult to save the tile as it is mostly glass, crack and can fly in pieces. Can usually artificial marble slabs off the property with a putty knife and the appropriate solvent. Plastic laminate counter tops, wood chips and generally nailed or screwed to the cabinet base. These fasteners are located by looking under the counter-summit, within the Council of Ministers.
2. At this point, you will be ready to remove the tanks from their permanent locations. It is recommended that you remove the basic units of the first so you can get under the wall cabinets to facilitate disassembly.
3. It will make this task much easier if you remove all the doors and drawers before you try to remove the cabinets. Then you can easily search inside the cabinet to see where and by what means and reply to him.
4. If the attached units with each other, you can either separate them and less of them individually or less and one of them. If you are planning to re-use hardware and clean, and store all of the pulls, knobs and bolts in plastic bags. Can be linked to reservoirs in a variety of ways. Usually the oldest types of nailed to the wall, to the lower part of and perhaps even / or to each other and be at the heart of the wall itself. And probably (in the latter case it would be necessary to destroy all or part of the wall). The latest units to be held in place with screws. But some models may be hung on metal or wood hangers Council of Ministers.
The tanks usually with metal hangers. And can simply be pulled away from the wall at the bottom then lifted up out of the hangers. Removing the hangers from the wall. Whether the use of screws, remove them. If the Council of Ministers was nailed to the place, and ease of the end of the flat pry bar between the unit and the wall. To do so in both the top and bottom. Pry loose the Council of Ministers, while someone else supports it from below. Add a block of wood between the surface of the wall and pry bar to avoid purity of the wall. If this method does not loosen the nails, and pound the Council of Ministers towards the wall in an attempt to make the nail heads of the most prominent enough to draw them.
5. Are often lower cabinets wall at the top and can be unscrewed property or loose. Remove lid or pour carefully pry off the board in the floor. Remove any screws and lift the cabinet away from the wall.
1. Once the banks have been removed and its fittings, the next step will be to dismantle the counter tops, and remove the cabinets. For this you will need a hammer, pry bar, putty knife, screwdriver, crowbar, and I saw him. Is conducting several counter tops, plywood, and nailed to the base cabinets, with the completion of the development of materials on top. With the exception of plastic laminated counter top, the only part worth saving is the substance the end - in the tiles and marble or wood. It can be difficult to save the tile as it is mostly glass, crack and can fly in pieces. Can usually artificial marble slabs off the property with a putty knife and the appropriate solvent. Plastic laminate counter tops, wood chips and generally nailed or screwed to the cabinet base. These fasteners are located by looking under the counter-summit, within the Council of Ministers.
2. At this point, you will be ready to remove the tanks from their permanent locations. It is recommended that you remove the basic units of the first so you can get under the wall cabinets to facilitate disassembly.
3. It will make this task much easier if you remove all the doors and drawers before you try to remove the cabinets. Then you can easily search inside the cabinet to see where and by what means and reply to him.
4. If the attached units with each other, you can either separate them and less of them individually or less and one of them. If you are planning to re-use hardware and clean, and store all of the pulls, knobs and bolts in plastic bags. Can be linked to reservoirs in a variety of ways. Usually the oldest types of nailed to the wall, to the lower part of and perhaps even / or to each other and be at the heart of the wall itself. And probably (in the latter case it would be necessary to destroy all or part of the wall). The latest units to be held in place with screws. But some models may be hung on metal or wood hangers Council of Ministers.
The tanks usually with metal hangers. And can simply be pulled away from the wall at the bottom then lifted up out of the hangers. Removing the hangers from the wall. Whether the use of screws, remove them. If the Council of Ministers was nailed to the place, and ease of the end of the flat pry bar between the unit and the wall. To do so in both the top and bottom. Pry loose the Council of Ministers, while someone else supports it from below. Add a block of wood between the surface of the wall and pry bar to avoid purity of the wall. If this method does not loosen the nails, and pound the Council of Ministers towards the wall in an attempt to make the nail heads of the most prominent enough to draw them.
5. Are often lower cabinets wall at the top and can be unscrewed property or loose. Remove lid or pour carefully pry off the board in the floor. Remove any screws and lift the cabinet away from the wall.
