How to Wire a Dodge Dakota for a Trailer

1). Loosen and remove the screws the tail lamp assemblies in place. Pull the tail lamp assemblies forward to expose the tail lamp wires. Each wire color is marked as to function on the back of the tail lamp assembly.
2). Place a wire splice connector over the right turn signal wire. Insert the green wire from the harness into the splice connector. Crimp the connector onto the wire pair.
3). Place a wire splice connector over the left turn signal wire. Insert the yellow wire from the harness into the splice connector. Crimp the connector onto the wire pair.
4). Place a wire splice connector over the taillight signal wire. Insert the brown wire from the harness into the splice connector. Crimp the connector onto the wire pair.
5). Place a wire splice connector over one of the ground wires. Insert the white wire from the harness into the splice connector. Crimp the connector onto the wire pair.