How to Troubleshoot a Minn Kota
- 1). Check the battery for proper voltage with your voltmeter. There should be between 12.4 and 13.8 volts in a freshly charged battery. If you have 8 volts or less, then you need to either replace the battery or charge it for several days.
- 2). Check to ensure that all wing nuts that secure the trolling motor wires to the battery are tightly fastened. A loose wing nut will not conduct electricity.
- 3). Check all battery connections for signs of corrosion. Corroded wires will not transmit power. If your wires are seriously corroded, then you will have to cut out the bad part of the wire and splice two good parts with a wire nut. Replace the entire wire if it is bad.
- 4). Check the wiring through your boat for signs of wear or burning. If you find any bad spots in the wiring, then you can snip the wires and either splice to a good spot or completely replace the wire.
- 1). Disconnect the foot pedal.
- 2). Plug in a foot pedal that is known to work. If you don't have any friends who own a Minn Kota with a foot pedal, go to your local dealer and ask if you can borrow one to do a test.
- 3). Plug in the good pedal and test it by moving the head left and right. Run the unit through the entire range of speeds. If the unit will turn and the speed controls are working you have a failed foot pedal. Replace the foot pedal.