Instructions to Use a Biscuit Joiner
- 1). Determine the location where the biscuits are needed. Mark these points with a pencil.
- 2). Adjust the depth of the blade on the biscuit joiner, based on the size of biscuit chosen. The height on the tool corresponds to the center of the biscuit once inserted.
- 3). Press the tool down on the wood surface while depressing the trigger. Press firmly on the tool to cause the blade to make the cut. Release the trigger and retract the tool once the cut is made.
- 4). Squeeze a liberal amount of glue into the biscuit cut. Press the biscuit firmly into the slot made by the joiner.
- 5). Repeat the process for the other piece of wood.
