How to Install a Sony Xplod CD Player
- 1). Connect the power cord or insert eight size-D batteries into the battery compartment. The battery compartment is under the unit. If you want to use the unit on batteries, disconnect the main power.
- 2). Load the remote with batteries. The remote takes two AA batteries. Lift up the remote's battery cover and insert the batteries. Be sure to get the polarity correct.
- 3). Hook up any headphones. Connect the headphones to the headphones jack. The headphone jack is located below the left-hand speaker if you're looking at the face of the boombox.
- 4). Turn the power of any portable digital music player off. Make sure the power is off on the boombox, too. Slide the Audio-In jack cover off. The Audio-In jack is below the right-hand speaker if you're looking at the front of the boombox. Just slide the cover forward and then it hinges outward.
- 5). Hook up the optional equipment such as an MP3 player. There's a built-in audio cable with a stereo mini-plug, or you can use an audio connecting cable, which is not supplied. Connect it to the line-output jack.
- 6). Turn the volume control to a low setting and turn on the power. Turn the MP3 player on and press "Audio In" on the control panel.
- 7). Turn the volume up slowly. The output from the MP3 player is through the boombox.
