How to Make Homemade Indo Board
- 1). Lay your 33-by-14 inch plywood flat and lay a piece of the 2-by-14 inch plywood on either side of the board.
- 2). Lay the boards so that the 14-inch length of the 2-by-14 inch piece matches up with the 14-inch of the 33-by-14 inch piece. These smaller pieces of wood serve as stoppers.
- 3). Place two nails on either side of each piece of the stoppers and hammer them in place. Make certain that your nails are not too long.
- 4). Wrap a piece of athletic tape on both ends of the pipe and one piece in the middle. This will create friction.
- 5). Step on the indo board to test friction. Adjust the tape or pipe accordingly.