How to Set the Time on Fossil Watches
- 1
Analog watch:Pull out the crown to position No. 3.Turn the crown counter-clockwise until you set the correct time.Push the crown back in to position No. 1. - 2
Digital watch:The setting sequence for the watch is: month, date, a.m./p.m., hour and minutes.Press "B" to go to the next setting sequence and "A" to exit.Press "B" and then select a.m./p.m., then press "B" again to set the hour; finally press "B" once more to set the desired minutes. - 3
Analog/Digital watch:Press "A" to move between 12/24-hour formats.Press "B" to move between time and date.Setting sequence is as follows: a.m./p.m., hour, minutes, month, date and weekday.Press "A" to set the value and to go onto the next value. Press "A" to exit.Press and hold "A," and the hour will start flashing; press "B" to increase digits to the desired time. - 4
Multifunction watch:Pull the crown out to position No. 3, turn clockwise to go to hour and minutes hands; the small dial showing days of the week will move, and the 24-hour dial will also move correspondingly.To set the date, pull the crown out to position No. 2 and turn clockwise until you have set the desired date; push the crown back to position No. 1.
