How to Use Bluetooth in Windows XP
- 1). Check to see whether or not your computer is Bluetooth-enabled. Many computers already have Bluetooth functionality, and you can check this by going to your computer's control panel section and then looking for a Bluetooth icon. It is shaped like a B and should be blue. If you find the icon, your computer already has a Bluetooth receiver, and you can go on to step 3. If not, you will need to follow step 2.
- 2). Install a Bluetooth adapter. Bluetooth adapters like the one pictured above plug into a standard USB port and use drivers to allow your computer to use the Bluetooth signal. The drivers you need should come on a CD bundled with the adapter.
- 3). Enable your computer's Bluetooth "Discovery" mode. Your computer will find, or "discover" any active Bluetooth devices in its vicinity. The specific process may vary depending on your adapter and device, but generally involves opening the Bluetooth utility program on your computer and then clicking a "Search for Devices" option. The utility is in the programs menu if you are using an adapter or in the Control Panel if your computer already has Bluetooth. For headsets and telephones, you will probably have to enter a password, which can be found in the setup instructions that came with the device. Follow the manufacturer's instructions for installation.
- 4). Activate your Bluetooth device. Whether you are activating a printer, gaming control or headset, there should be a button or switch that activates Bluetooth functionality. Follow the manufacturer's instructions.
- 5). Confirm your Bluetooth network link. Onceyour computer locates your Bluetooth device, a message will pop up asking if you want to set up a link between the computer and the device. Simply press the "OK" button to confirm this connection. Once this is done, you will be able to use your device at your leisure, and you will not need to sync it again. Simply power it on to activate it, and your computer will do the rest of the work.
