How to Clean With Kaboom Products
- 1). Pour 1/3 cup Kaboom Bowl Blaster into your toilet bowl. It will foam up and loosen stains. Brush your toilet bowl after about 2 minutes and flush. Your toilet should be sparkling clean with a fresh citrus smell. To refresh your toilet bowl pour 1 cup Kaboom Bowl Blaster into your toilet, wait 20 minutes and flush.
- 2). Lift the top off your toilet tank, and clip the Kaboom Scrub Free unit to the back of the tank. The unit contains two plastic tubes, one on the left and one on the right. Insert the tube on the right into the open pipe in the center of the tank. Another tube will already be in the tank. Lift it out, and look to see where the other end is connected. Disconnect that tube, and replace it with the tube on the left of the Kaboom Scrub Free unit. Installation is easy, takes less than 1 minute and you won't need to touch the water with your hands. Kaboom even offers a short video demonstrating the installation. (See Resources.) Unscrew the lid on the Kaboom Scrub Free unit, insert the Kaboom cleaning tablet and replace the lid. Each time you flush, your toilet literally cleans itself for up to 3 months.
- 3). Clean your stainless steel, porcelain, ceramic, fiberglass, acrylics and even concrete with Kaboom Shower, Tub and Tile Cleaner. Spray these surfaces directly, wait 3 minutes, thoroughly rinse with water and wipe clean. Kaboom Shower, Tub and Tile Cleaner is effective against soap scum, lime, hard water buildup and grease.
- 4). Spray Kaboom Shower, Tub and Tile Cleaner on your outdoor windows, and wipe with a cleaning pad to cut through the hard water stains that sprinklers and rainwater can leave behind.
- 5). Spray blue Kaboom Foam-Tastic bathroom cleaner, and watch it change colors as it penetrates grime and deep cleans your bathroom surfaces. As soon as the color changes from blue to white, wipe away the Kaboom cleaning foam for a fresh clean surface.
