How to Install a Stereo on a Honda Accord EX Wagon
- 1). Lift the hood of the Honda Accord and disconnect the grounding cable from the negative battery terminal with the 10 millimeter wrench.
- 2). Remove the clock from the dash panel with a small flathead screwdriver. Pull the clock from the dashboard and disconnect the power supply wiring.
- 3). Remove the screw in the back of the opening revealed by the removed clock with a Philips-head screwdriver.
- 4). Remove the two screws on the under side of the center dash panel with a Philips-head screwdriver.
- 5). Pull the center dash panel from the bottom edge, away from the dashboard. Work your hands around the perimeter of the panel. The panel will snap free from the dashboard.
- 6). Remove the four screws surrounding the factory stereo. The two screws on either side can be removed with a Philips-head screwdriver.
- 7). Pull the factory stereo from the stereo mounting dock and disconnect the wiring connected to the back of the unit.
- 8). Connect the stereo wiring to a wiring harness adapter.
- 9). Insert a faceplate adapter into the vacant stereo mounting dock. Pull the stereo wiring with the wiring harness adapter not connected through to the front of the faceplate adapter.
- 10
Connect the wiring harness adapter leads to the aftermarket stereo. - 11
Slide the aftermarket stereo into the opening provided by the faceplate adapter. - 12
Replace the grounding cable clamp onto the negative battery terminal with a 10 millimeter wrench.
